Plate & Panel Products
Manufacturer
Gülmar-made plywood, MDF and curved-panel solutions.
®
Compact Laminate
Authorized Dealer
GENTAŞ compact laminate — high-pressure surfaces, impact & moisture resistant.
®
Exterior Panels
Authorized Dealer
G-EXT exterior panels — weather-resistant, long-lasting facades.
Solid G-Lab compact surfaces resistant to acids, bases and solvents — non-porous, hygienic and long-lasting worktops for hospital, university and industrial laboratories.
G-Lab laboratory worktops are solid, homogeneous compact panels produced by impregnating cellulose layers with phenolic resin and pressing them under high pressure and temperature. Their non-porous surface resists acids, bases and solvents and holds no liquids, stains or microorganisms. They keep their form under heavy use, never swell or warp and are easy to disinfect — which is why they are the first choice of hospital, research and industrial laboratories.
High surface resistance to acids, bases and solvents (per EN 438-2 / SEFA 3 method).
A surface that absorbs no liquid; it harbours no bacteria or mould and is easy to disinfect.
Sink, tap, socket and drip-groove cut-outs machined with CNC precision.
G-Lab is a lab-grade phenolic compact laminate. Its solid, single-piece structure needs no separate edge banding and is fully resistant to water, chemicals and impact.
Chemical-resistant protective top layer
Resin-impregnated decor paper
Kraft layers pressed under high pressure
Symmetrical double-sided build
It answers every challenge of the lab environment — chemicals, heat, moisture, impact and hygiene — with a single surface.
Resists reagent spills and aggressive cleaning agents.
The non-porous surface harbours no microorganisms and is bacteriostatic.
High heat resistance suited to work near burners and with hot equipment.
Unaffected by moisture and constant wet work; it never swells or warps.
Its solid compact structure resists scratching, impact and daily wear.
Produced to exact size with drip groove, sink, tap and socket cut-outs.
The table below summarises the surface's resistance to representative reagents. Values are typical results based on the EN 438-2 and SEFA 3 surface-resistance method; final performance varies with contact time, concentration and temperature.
These figures are indicative; for critical applications request project-specific testing and a technical datasheet.
It works safely with everyday laboratory chemistry across a wide pH range, from strong acids to strong bases.
A transparent, controlled process from your dimensions and technical drawing to an installation-ready laboratory worktop.
Layout, sink and tap positions and technical requirements are defined.
The worktop plan, edge profile and cut-outs are prepared and approved in CAD.
Sink, tap, socket and drip-groove cut-outs are machined to the millimetre.
Dimensions, edges and surfaces are checked and batches are reported.
Worktops are labelled, securely packed and installed on site.
Our laboratory worktops can be produced in large formats, high thicknesses and project-specific details.
The worktop edge and functional cut-outs are machined to project specification to suit your lab layout.
A clean, modern line for standard laboratory layouts.
A chamfer that softens the edge and eases cleaning.
A rounded, safe edge that reduces the risk of knocks.
A perimeter groove that stops liquid running under the worktop.
The same solid G-Lab surface is configured specifically for different laboratory and industrial environments.
Safe work surfaces resistant to acids, bases and solvents — ideal for chemistry and analysis laboratories.
Hygienic worktops for healthcare facilities and clinical labs, with an antibacterial, easy-to-disinfect non-porous surface.
Hygienic, food-contact industrial kitchen surfaces resistant to heat, moisture and constant cleaning.
CNC-precision worktop cutting to your project size and form, with sink, tap, socket and drip-groove cut-outs.
Unlike traditional porous surfaces, G-Lab contains no voids for liquids and microorganisms to settle into. Its seamless whole surface suits heavy disinfection, providing a safe working base in healthcare and food environments.
High-pressure decorative laminate (HPL) product standard
Laboratory surface chemical-resistance test method
Chemical resistance, abrasion and heat-resistance tests
International performance standard for decorative laminates
The surface resists dilute and many concentrated acids, bases and organic solvents. Our resistance matrix summarises the results for representative reagents. For very aggressive or long-contact spills we recommend keeping contact time short; for critical applications we provide project-specific testing and a technical datasheet.
Laboratory worktops are commonly produced in 12, 18, 20 and 25 mm thicknesses. We determine the most suitable thickness together based on span, supporting system and load.
Yes. Undermount or top-mount sink seats, tap and socket holes, drip grooves and custom forms are machined on our CNC centres to the millimetre, and the worktop is delivered installation-ready.
The non-porous solid structure holds no liquids or microorganisms and is bacteriostatic. The seamless, joint-free installation leaves no hygiene bridge, and the surface cleans easily with aggressive disinfectants.
Laboratory worktops are usually preferred in neutral tones such as light grey, anthracite and black; other colours from the broad Gülmar decor collection can also be applied. We assess the options that suit your project together.
Share your layout, dimensions and chemical requirements; we will recommend the right thickness, edge profile and details and prepare a fast quote.
Kemalpaşa Mahallesi 7086 SK NO: 19 Pınarbaşı, Bornova İzmir
© 2026 Gülmar Yapı · All rights reserved.
